Video Resources

Oscillator Transconductance

In episode six of our Oscillator Design Principles multipart series, David Meaney will discuss oscillator transconductance, resonance modes, and design considerations. Transconductance is vital in understanding if an oscillator will start consistently. There are a variety of metrics that should be reviewed to judge oscillator transconductance. The crystal frequency is limited by the physical dimensions of the unit – length, width, and AT cut. Overtone frequencies require the crystal to operate at the desired frequency and overtone. Crystals designed to operate at their fundamental frequencies should never be used at an overtone frequency. David covers two ways to suppress the fundamental frequency and modify the oscillator circuit. When you are designing your board, there are a variety of design considerations that should be taken under advisement.

Please contact us if you need additional information or have a specific requirement in your application.

ECS, Inc. International
15351 West 109th Street
Lenexa, KS 66219

Tel: 913-782-7787
Toll Free: 1-800-237-1041
Fax: 913-782-6991

About ECS

Founded in 1980, ECS Inc. International has grown to become one of the most recognized and experienced manufacturers of frequency control management products in the world.
Learn More

Reach Out to ECS

15351 West 109th Street, Lenexa, KS 66219

International Headquarters

© ECS Inc. International. All Rights Reserved. | Terms of Use